|
|
|
Miller 1576 Sprinter II Carbon Fiber Tripod
 Prices below were obtained from average internet prices and may have changed
from the posting date.
|
 Miller 1576 Sprinter II Two Stage Carbon Fiber Tripod- Supports up to 99 lb (45
kg) The Miller 1576 Sprinter II carbon fiber tripod is meant for run-and-gun ENG work where rapid setup and leveling are as important as rigidity and accuracy. The industry-standard 100mm levelling
half-bowl accepts most fluid heads, and the carbon fiber legs are lighter than
aluminum and absorb vibration. • Inline carry handle. $1,506.95.
to |
 Miller 1580 Sprinter II Two Stage Tripod with 100mm bowl- supports up to 99 lb. The Miller 1580 Sprinter II aluminum tripod is meant for run-and-gun ENG work where rapid setup and leveling are as important as rigidity and accuracy. The industry-standard 100mm levelling
half-bowl accepts most fluid heads, and the aluminum legs are light and offer an
economical alternative to carbon fiber. • Forever-flat rubber foot design •
Inline carry handle (45 kg) $1,096.95. |
 Miller 1589 Sprinter II One Stage Tripod with 100 mm Bowl - Supports up to 99 lb. The Miller 1589 Sprinter II aluminum tripod is meant for run-and-gun ENG work where rapid setup and leveling are as important as rigidity and accuracy. The industry-standard 100mm levelling
half-bowl accepts most fluid heads, and the aluminum legs are light and offer an
economical alternative to carbon fiber. (45 kg) $754.50. |
 Miller 1643 Miller Solo DV Alloy Tripod (black) with DS-20 Fluid Head, Camera
Plate, Pan Arm, and Soft Case- Supports up to 22 lb (10 kg). The Miller Solo DV Alloy Tripod with DS-20 Fluid Head is a capable, comprehensive kit for the Mini-DV/DVCAM shooter on the run. Whether you are shooting ENG, EFP, or an independent feature, you'll appreciate the simplicity and ease of setup of the Solo alloy legs, and the adaptability of the DS-20 fluid head.
The DS20 fluid head mounts with an industry-standard 75 mm half-ball, and uses
oversized sliding camera plates which, in conjunction with the two-position
counterbalance, afford perfect camera balance. Pan and tilt movements are
governed with continuously variable fluid drag, and reliably locked off with
independent, positive-lock caliper brakes. $1,424.95. |
 Miller 1680 Arrow 40 Tripod System- Includes Arrow 40 Fluid Head, 694
Telescoping Pan Arm, 860 Camera Plate, 1589G 1-Stage Alloy Tripod, 470 Ground
Spreader, and 870 Soft Case - Supports 35.2 lbs (16.0 kg) The Miller 1680 Arrow 40 tripod system consists of the Arrow 40 fluid head, 694 telescoping pan arm, 860 Arrow camera plate, 1589G Sprinter II single-stage alloy tripod, 470 ground spreader, and the 870 soft case.
The Arrow 40 fluid head is designed for use with fully configured ENG camcorder
packages weighing up to 35.2 lbs (16.0 kg). Indexed variable fluid drag and
counterbalance ensure accurate, speedy setups, and a sliding camera plate with
70 mm of travel accommodates irregular camera/lens combinations. Once mounted
and leveled on its 100 mm half-ball, the illuminated operational controls are
accessible from the rear for easy operator reference and adjustment. $5,002.50. |
 Miller 1681 Arrow 40 Tripod System- Includes Arrow 40 Fluid Head, 694 Pan Arm,
860 Camera Plate, 1589 Sprinter II 1-Stage Alloy Tripod, 990 Mid-level Spreader,
475 Sprinter II/HD Rubber Feet, and 870 Soft Case - Supports 35.2 lbs (16.0 kg). The Miller 1681 Arrow 40 tripod system consists of the Arrow 40 fluid head, 694 pan arm, 860 camera plate, 1589 Sprinter II 1-stage alloy tripod, 990 mid-level spreader, 475 Sprinter II/HD rubber feet, and the 870 Arrow softcase.
The Arrow 40 fluid head is designed for use with fully configured ENG camcorder
packages weighing up to 35.2 lbs (16.0 kg). Indexed variable fluid drag and
counterbalance ensure accurate, speedy setups, and a sliding camera plate with
70 mm of travel accommodates irregular camera/lens combinations. Once mounted
and leveled on its 100 mm half-ball, the illuminated operational controls are
accessible from the rear for easy operator reference and adjustment. $4,879.50. |
 Miller 1690 Arrow 40 Tripod System- Includes Arrow 40 Fluid Head, 694 Pan Arm,
860 Camera Plate, 1576 Sprinter II 2-Stage Carbon Fiber Tripod, 990 Mid-Level
Spreader, and 872 Soft Case - Supports 35.2 lbs (16.0 kg) $5,809.50. The Miller 1690 Arrow 40 tripod system consists of the Arrow 40 fluid head, 694 pan arm, 860 camera plate, 1576 Sprinter II 2-stage carbon fiber tripod, 990 mid-level spreader, and the Arrow 872 soft case.
The Arrow 40 fluid head is designed for use with fully configured ENG camcorder
packages weighing up to 35.2 lbs (16.0 kg). Indexed variable fluid drag and
counterbalance ensure accurate, speedy setups, and a sliding camera plate with
70 mm of travel accommodates irregular camera/lens combinations. Once mounted
and leveled on its 100 mm half-ball, the illuminated operational controls are
accessible from the rear for easy operator reference and adjustment. |
 Miller 1709 Arrow 40 Tripod System- Includes Arrow 40 Fluid Head, 694 Pan Arm,
860 Camera Plate, 1505 3-Stage Carbon Fiber Tripod, 1520 Solo DV Strap, and 872
Soft Case - Supports 35.2 lbs (16.0 kg). The Miller 1709 Arrow 40 tripod system consists of the Arrow 40 fluid head, 694 pan arm, 860 camera plate, 1505 3-stage carbon fiber tripod, 1520 Solo DV strap, and the Arrow 872 soft case.
The Arrow 40 fluid head is designed for use with fully configured ENG camcorder
packages weighing up to 35.2 lbs (16.0 kg). Indexed variable fluid drag and
counterbalance ensure accurate, speedy setups, and a sliding camera plate with
70 mm of travel accommodates irregular camera/lens combinations. Once mounted
and leveled on its 100 mm half-ball, the illuminated operational controls are
accessible from the rear for easy operator reference and adjustment. $4,819.95. |
 Miller 1717 Arrow 55 Tripod System- Includes 1028 Arrow 55 Fluid Head, 860
Camera Plate, 694 Telescoping Pan Arm, 1589G Sprinter II One-Stage Alloy Tripod,
470 Ground Spreader, and 870 Soft Case - Supports 55.0 lbs (25.0 kg). The Miller 1717 Arrow 55 tripod system consists of the 1028 Arrow 55 fluid head, 860 Arrow camera plate, 694 telescoping pan arm, 1589G Sprinter II single-stage alloy tripod, 470 Sprinter II ground spreader, and the 870 Arrow soft case.
The Arrow 55 is a 100mm true fluid head intended for use with heavily configured ENG/EFP camcorders weighing up to 55.0 lbs (25.0 kg). It features 7-step fluid drag, 4-step spring counterbalance, and an oversized 100mm sliding quick-release camera plate. The LED illuminated bubble level and drag controls are rear mounted for easy operator access and monitoring, and a second rosette is provided for left- or two-handed configurations. For peace of mind, the pan and tilt locks utilize calliper
disc brakes for reliable, short-throw fixing. $5,519.95. |
 Miller 1718 Arrow 55 Tripod System- Includes 1028 Arrow 55 Fluid Head, 860
Camera Plate, 694 Telescoping Pan Arm, 1589G Sprinter II One-Stage Alloy Tripod,
990 Mid-Level Spreader, and 870 Soft Case - Supports 55.0 lbs (25.0 kg). The Miller 1718 Arrow 55 tripod system consists of the 1028 Arrow 55 fluid head, 860 Arrow camera plate, 694 telescoping pan arm, 1589G Sprinter II single-stage alloy tripod, 990 Sprinter II mid-level spreader, and the 870 Arrow soft case.
The Arrow 55 is a 100mm true fluid head intended for use with heavily configured ENG/EFP camcorders weighing up to 55.0 lbs (25.0 kg). It features 7-step fluid drag, 4-step spring counterbalance, and an oversized 100mm sliding quick-release camera plate. The LED illuminated bubble level and drag controls are rear mounted for easy operator access and monitoring, and a second rosette is provided for left- or two-handed configurations. For peace of mind, the pan and tilt locks utilize calliper
disc brakes for reliable, short-throw fixing. $5,877.95. |
 Miller 1726 Arrow 55 Tripod System- Includes 1028 Arrow 55 Fluid Head, 694 Pan
Arm, 860 Camera Plate, 1576 Sprinter II 2-Stage Carbon Fiber Tripod, 990
Mid-Level Spreader, 475 Rubber Feet, and 872 Soft Case - Supports 55.0 lbs (25.0. The Miller 1726 Arrow 55 tripod system consists of the 1028 Arrow 55 fluid head, 694 telescoping pan arm, 860 Arrow camera plate, 1576 Sprinter II 2-stage carbon fiber tripod, 990 Sprinter II/HD mid-level spreader, 475 Sprinter II/HD rubber feet, and the 872 Arrow soft case.
The Arrow 55 is a 100mm true fluid head intended for use with heavily configured ENG/EFP
camcorders weighing up to 55.0 lbs (25.0 kg). It features 7-step fluid drag,
4-step spring counterbalance, and an oversized 100mm sliding quick-release
camera plate. The LED illuminated bubble level and drag controls are rear
mounted for easy operator access and monitoring, and a second rosette is
provided for left- or two-handed configurations. For peace of mind, the pan and
tilt locks utilize caliper disc brakes for reliable, short-throw fixing. kg)
$6,433.50. |
 Miller 1737 Arrow 55 Tripod System- Includes 1028 Arrow 55 Fluid Head, 860
Camera Plate, 694 Telescoping Pan Arm, 931 HD 1-Stage Alloy Tripod, 990
Mid-Level Spreader, 475 Rubber Feet- Supports 55.0 lb (25.0 kg). The Miller 1737 Arrow 55 tripod system consists of the 1028 Arrow 55 Fluid Head, 860 Arrow Camera Plate, 694 Telescoping Pan Arm, 931 HD 1-Stage Alloy Tripod, 990 Sprinter II/HD Mid-Level Spreader, and the 475 Sprinter II/HD Rubber Feet.
The Arrow 55 is a 100mm true fluid head intended for use with heavily configured ENG/EFP
camcorders weighing up to 55.0 lbs (25.0 kg). It features 7-step fluid drag,
4-step spring counterbalance, and an oversized 100mm sliding quick-release
camera plate. The LED illuminated bubble level and drag controls are rear
mounted for easy operator access and monitoring, and a second rosette is
provided for left- or two-handed configurations. For peace of mind, the pan and
tilt locks utilize caliper disc brakes for reliable, short-throw fixing.
$6,269.95. |
 Miller 1741 Arrow 55 Tripod System- Includes 1028 Arrow 55 Fluid Head, 694 Pan
Arm, 860 Camera Plate, 925 HD 2-Stage Carbon Fiber Tripod, 990 Mid-Level
Spreader, 475 Rubber Feet, and 872 Soft Case - Supports 55.0 lbs (25.0 kg). The Miller 1741 Arrow 55 tripod system consists of the 1028 Arrow 55 fluid head, 694 telescoping pan arm, 860 Arrow camera plate, 925 HD 2-stage carbon fibre tripod, 990 Sprinter II/HD mid-level spreader, 475 Sprinter II/HD rubber feet, and the 872 Arrow soft case.
The Arrow 55 is a 100mm true fluid head intended for use with heavily configured ENG/EFP
camcorders weighing up to 55.0 lbs (25.0 kg). It features 7-step fluid drag,
4-step spring counterbalance, and an oversized 100mm sliding quick-release
camera plate. The LED illuminated bubble level and drag controls are rear
mounted for easy operator access and monitoring, and a second rosette is
provided for left- or two-handed configurations. For peace of mind, the pan and
tilt locks utilize caliper disc brakes for reliable, short-throw fixing.
$7,238.95. |
 Miller 1769 Arrow 25 Tripod System- Includes Arrow 25 Fluid Head, 679 Pan Arm,
860 Camera Plate, 1589G 1-Stage Alloy Tripod, 470 Ground Spreader, and 870 Soft
Case - Supports 30.8 lbs (14.0 kg). The Miller 1769 Arrow 25 tripod system consists of the Arrow 25 fluid head, 679 pan arm, 860 camera plate, 1589G 1-Stage Alloy Tripod, 470 ground spreader, and 870 soft case.
The Arrow 25 fluid head is designed for use with fully configured ENG camcorder packages weighing up to 30.8 lb (14.0 kg). Indexed variable fluid drag and counterbalance ensure accurate, speedy setups, and a sliding camera plate with 70 mm of travel accommodates irregular camera/lens combinations. Once mounted and levelled
on its 100 mm half-ball, the illuminated operational controls are accessible
from the rear for easy operator reference and adjustment. $4,267.50. |
 Miller 1770 Arrow 25 Tripod System- Includes Arrow 25 Fluid Head, 679 Pan Arm,
860 Camera Plate, 1589 1-Stage Alloy Tripod, 990 Mid-Level Spreader, 475 Rubber
Feet, and 870 Soft Case - Supports 30.8 lb (14.0 kg). The Miller 1770 Arrow 25 tripod system consists of the Arrow 25 fluid head, 679 pan arm, 860 camera plate, 1589 1-Stage Alloy Tripod, 990 mid-level spreader, 475 rubber feet, and 870 soft case.
The Arrow 25 fluid head is designed for use with fully configured ENG camcorder packages weighing up to 30.8 lb (14.0 kg). Indexed variable fluid drag and counterbalance ensure accurate, speedy setups, and a sliding camera plate with 70 mm of travel accommodates irregular camera/lens combinations. Once mounted and levelled
on its 100 mm half-ball, the illuminated operational controls are accessible
from the rear for easy operator reference and adjustment. $4,584.95. |
 Miller 1773 Arrow 25 Tripod System- Includes Arrow 25 Fluid Head, 679 Pan Arm,
860 Camera Plate, 1580G 2-Stage Alloy Tripod, 470 Ground Spreader, and 872 Soft
Case - Supports 30.8 lbs (14.0 kg). The Miller 1773 Arrow 25 tripod system consists of the Arrow 25 fluid head, 679 pan arm, 860 camera plate, 1580G 2-stage alloy tripod, 470 ground spreader, and 872 soft case.
The Arrow 25 fluid head is designed for use with fully configured ENG camcorder packages weighing up to 30.8 lbs (14.0 kg). Indexed variable fluid drag and counterbalance ensure accurate, speedy setups, and a sliding camera plate with 70mm of travel accommodates irregular camera/lens combinations. Once mounted and levelled
on its 100mm half-ball, the illuminated operational controls are accessible from
the rear for easy operator reference and adjustment. $4,588.50. |
 Miller 1774 Arrow 25 Tripod System- Includes Arrow 25 Fluid Head, 679 Pan Arm,
860 Camera Plate, 1580 2-Stage Alloy Tripod, 990 Mid-Level Spreader, and 872
Soft Case - Supports 30.8 lbs (14.0 kg). The Miller 1774 Arrow 25 tripod system consists of the Arrow 25 fluid head, 679 pan arm, 860 camera plate, 1580 2-stage alloy tripod, 990 mid-level spreader, and 872 soft case.
The Arrow 25 fluid head is designed for use with fully configured ENG camcorder packages weighing up to 30.8 lbs (14.0 kg). Indexed variable fluid drag and counterbalance ensure accurate, speedy setups, and a sliding camera plate with 70mm of travel accommodates irregular camera/lens combinations. Once mounted and levelled
on its 100mm half-ball, the illuminated operational controls are accessible from
the rear for easy operator reference and adjustment. $4,664.95. |
 Miller 1778 Arrow 25 Tripod System- Includes Arrow 25 Fluid Head, 679 Pan Arm,
860 Camera Plate, 1576 2-Stage Carbon Fiber Tripod, 990 Mid-Level Spreader, and
872 Soft Case - Supports 30.8 lbs (14.0 kg). The Miller 1778 Arrow 25 tripod system consists of the Arrow 25 fluid head, 679 pan arm, 860 camera plate, 1576 2-stage carbon fiber tripod, 990 mid-level spreader, and 872 soft case.
The Arrow 25 fluid head is designed for use with fully configured ENG camcorder packages weighing up to 30.8 lb (14.0 kg). Indexed variable fluid drag and counterbalance ensure accurate, speedy setups, and a sliding camera plate with 70mm of travel accommodates irregular camera/lens combinations. Once mounted and levelled
on its 100mm half-ball, the illuminated operational controls are accessible from
the rear for easy operator reference and adjustment. $5,232.95. |
 Miller DS-10 Aluminum Tripod System - consists of: DS-10 Fluid Head, DS 1-Stage
Tripod, Mid-Level Spreader and Softcase - Supports 10 lbs. The DS-10 is a complete, ready-to-go professional support system for DV lightweight camcorders. Comprised of an alloy diecast
fluid head with 75mm ball leveling, lightweight alloy ENG tripod, detachable
mid-level spreader, rubber feet and pan handle. The DS-10 offers the same
control features, fluid drag design and accessories as Miller's larger broadcast
products. The result is lightweight support that delivers superior performance,
with features like fully Variable Fluid Drag control, independent Pan/Tilt
locks, counterbalancing to provide finger tip control through the entire tilt
range and sliding quick release camera platform, for "fine tune" balancing.
$1,029.99. |
 Miller DS-20 Aluminum Tripod System - consists of: DS-20 Fluid Head, DS 2-Stage
Tripod, On-Ground Spreader and Softcase - Supports 20 lbs. The DS-20 tripod system consists of the DS-20 fluid head, designed to bring "Big Head" performance and professional features like Dynamic Fluid Drag control and an integrated Static Counterbalancing System, for today's lightweight DVCAM and DVC-PRO camcorders. Offers a sliding balance plate, independent Pan and Tilt locks, precision spirit level and integral 75mm ball leveling. The result is lightweight support that delivers superior performance.
Also included is a lightweight two-stage tripod with a 75mm-bowl fixing.
Constructed of aluminum alloy with toggle leg clamping system and are
independently adjustable. The ultimate for news gatherers who demand rock-solid
stability under the most hostile location conditions. $1,613.95. |
 Miller DS-10 DV Fluid Head with Solo Aluminum Tripod System- Supports up to 11
lb (5 kg). The Miller Solo 10 system combines the ultra rigid alloy Solo tripod with the versatile DS-10 75mm ball levelling head with selectable counterbalance. With a height range from 8" all the way up to 63" SOLO 10 accommodates 5lb - 10lb MiniDV and DVCAM payloads from barebones to fully stacked PD150 or Canon XL-1.
• Flick-of-a-switch 5-10 lb counter balance selection
• True fluid pan and tilt
• 75mm ball levelling $1,079.99. |
 Miller SOLO DV Carbon Fiber 2-Stage Tripod Legs (75mm Bowl) - Supports 44 lbs. The Solo DV carbon fiber spreaderless tripod, is designed for the single operator cameraman, providing ultra light, rock solid stability for an unbeatable low price. The Solo sets up quickly and securely to maximum 63" height and pack down to a compact 27" for transport and hitting a low of 8" for low angle shots. Selectable leg angle locks ensure rapid stabilization, while the 75mm diecast alloy bowl offers quick leveling, optimum torsional
rigidity and long term durability. • Carbon fiber construction • 75mm / 3" bowl
base • Double extension design • Concentric leg angle locks ensure rapid
stabilization at any height and are independently adjustable • Maximum height of
63.5-inch • Supports up to 44.0 lb $742.50. |
 Miller SOLO DV10 Carbon Fiber Tripod System. The Solo-10 tripod system, comprised of the ultralight, ultra rigid carbon fiber Solo tripod with the versatile DS-10 75mm ball-leveling head with selectable counterbalance, is a complete, ready-to-go professional support system for camcorders with a payload of 5 to 10 lbs.
The DS-10 offers the same control features, fluid drag design and accessories as
Miller's larger broadcast products. The result is lightweight support that
delivers superior performance, with features like fully Variable Fluid Drag
control, independent Pan/Tilt locks, counterbalancing to provide finger tip
control through the entire tilt range and sliding quick release camera platform,
for "fine tune" balancing. $1,249.99. |
 Miller SOLO DV20 Carbon Fiber Tripod System
- consists of: DS-20 Fluid Head,
SOLO DV 2-Stage Tripod and Softcase - Supports 20 lbs. The Solo-20 tripod system consists of the DS-20 fluid head, designed to bring "Big Head" performance and professional features like Dynamic Fluid Drag control and an integrated Static Counterbalancing System, for today's lightweight DVCAM and DVC-PRO camcorders. Offers a sliding balance plate, independent Pan and Tilt locks, precision spirit level and integral 75mm ball leveling. The result is lightweight support that delivers superior performance.
Also included is the Solo carbon fiber spreaderless tripod, providing ultra light, rock solid stability. The Solo sets up quickly and securely to maximum 63" height and pack down to a compact 27" for transport. Selectable leg angle locks ensure rapid stabilization, while the 75mm diecast alloy bowl offers quick leveling, optimum torsional
rigidity and long term durability. $1,649.95. |
 Miller SOLO VJ Carbon Fiber 3-Stage Tripod Legs (100mm Bowl) - Supports 66 lbs. The SOLO VJ with it's carbon fiber/magnesium design achieves incredibly high torsional rigidity with rock solid stability. Boasting an incredible 8" - 73" height range, this 3-Stage ring-locking tripod collapses down to a dwarf-like 25 1/2". Designed for Video Journalists on the run, SOLO VJ is ultra-light and ultra-versatile, utilizing leg-angle locking to eliminate the need for a spreader, and to reduce overall system weight and complexity.
• Carbon fiber construction, supports all full size ENG/EFP camcorders • 100mm /
4" bowl base • Safe, speedy 3-Stage ring lock leg clamping • Eliminates Spreader
with Leg Angle Lock • Maximum height of 73.6-inch • Supports up to 66.0 lb •
Spike or wind-down rubber feet. $939.99. |
|
|
|
Miller Monopods |
| Miller 311 Solo Pod 3-Stage Carbon Fiber Monopod- Supports up to 22.0 lbs (10.0 kg).The New Miller Solo Pod extends the Solo carbon fiber range to feature a lightweight quality monopod for the Professional DV
shooter. The ultra-stable precision made Solo Pod has a 3 stage
telescoping leg treated with the same comfortable neoprene grip well
known to the Solo range of products. Boasting a height range of 0.5 -
1.6m the Solo Pod and weighing 0.7 kg this lightweight addition to your
camera support kit is a must for those tight-fit applications in the
field. $159.99. |
|
|
|
|
|
